Vacuum Specifications
ABS construction throughout
makes this unit extremely rugged yet very lightweight.
4" detachable vac hose for chimney cleaning & 3" ID hose
for dryer vent cleaning.
The 1.5" ID accessory
kit comes standard with each vac and is also good for smoke shelves and
water pick-up.
3 individual motor switches allow you to increase the suction as needed.
Power cord pigtail for third motor power source. This provides a means
for separating the power consumption into two separate electrical circuits.
Power socket for droplight.
Drum tilts back on trolley or is completely removed for easy cleaning
for cleaning and also allows you to operate the vac in tighter areas.
Large 12" dia. non-marking wheels in the back and non-marking swivel
casters in the front.
| Specs | |
| Dimensions: |
|
| Width: | 22" |
| Height: | 45"
to top of handle 35" without trolley |
| Weight: | 58 lbs. |
Filtration: |
|
| 1st Stage: | large Micro-Coated bag filter (washable) |
| 2nd Stage: | cartridge HEPA filter |
CFM/Waterlift: |
|
| 1 motor | 140 CFM/60" waterlift |
| 2 motors | 252 CFM/65" waterlift |
| 3 motors | 378 CFM/70" waterlift |
Amps: |
|
| 1 motor | 8.7 amps @ 110 volts |
| 2 motors | 15 amps @ 110 volts |
| 3rd motor | 8.7
amps (requires separate circuit) |
Cord: |
|
| motors 1&2 | 33 ft. 14/3 |
| motor #3 | 50 ft. 16/3 extension cord needed. |